Oceanview manufactures gaming, business, ultra-wide and all-in-one PCs on an OEM, ODM and private-label basis for brands in 120+ countries. Logo, packaging and market-specific customisation starts at 300 PCS with 15 days to first sample; new housings and private tooling start at 300 PCS over a 4-week development cycle. CE, FCC, CB, RoHS and KC certification files, factory audit reports and paid samples are available before you commit to volume.
- 300 PCS minimum
- 15 days to sample
- ≥98% first-pass yield
- 3M units / year
Five categories cover almost every OEM and ODM request we receive. The first four run on existing tooling, so they carry no mould cost and no development cycle. Only the fifth — a new housing or private mould — requires tooling and a separate volume review.
| Category | What can be changed | Minimum | New mould |
| Product configuration | Size, flat or curved, panel type, resolution, refresh rate, response time, brightness grade, port combination, speakers, stand, VESA pattern | 300 PCS | No |
| Brand identity | Front bezel logo, rear logo, boot logo, OSD interface and language, accent colour, model naming | 300 PCS | No |
| Commercial materials | Rating plate, serial label, barcode, user manual, warranty card, colour box, shipping marks, pallet labels | 300 PCS | No (colour box needs a die-cut) |
| Market-specific contents | Power cord and plug, adapter, HDMI or DP cable, language pack, market compliance information | 300 PCS | No |
| Housing & structure | Shell colour, texture and surface finish, rear port layout, new industrial design, private mould development | 300 PCS | Yes |
| What does not require a new mould? |
What we do not change? |
|
| Logos, firmware, labels, packaging and accessories normally do not require a new mould — only new housings or stands need separate tooling and a volume review. If your project stays within the first four categories, expect 15 days to first sample instead of a tooling cycle. |
Panel manufacturer allocation on logo-level orders, and certification bodies already listed on a model, stay fixed. If your market requires a local certification we do not hold, we tell you the cost and lead time before quoting rather than after.
|
You can start from any of our 321 existing models instead of funding a new design. Sizes run from 18.5" to 49", resolutions from FHD to 5K, refresh rates from 60Hz to 360Hz, across IPS, VA and OLED panels. Pick a platform, send your brand assets, and the first sample is built on tooling that already exists.
 |
 |
 |
||
|
Gaming monitors, 21.5"–49", 60–360Hz |
Ultra-wide monitors, 34" / 40" / 49" | Business and office monitors, 21.5"–31.5" | ||
|
Flat and curved models from 24.5" to 32" at 165Hz to 360Hz, plus 34" and 49" ultra-wide. Customisable here: panel grade, overdrive tuning, RGB accent, stand design, OSD gaming presets and crosshair overlays. Most custom gaming monitor projects we quote start from a 27" QHD 240Hz or 31.5" QHD 165Hz platform.
Shop by size: custom gaming monitors · 27-inch gaming monitors · 32-inch gaming monitors |
21:9 and 32:9 panels from 3,440×1,440 to 5,120×1,440, 144Hz to 165Hz, with KVM switching and picture-by-picture. Customisable here: curvature, stand arm, port combination, firmware PBP layout. Ultra-wide is the smallest volume tier in the market, which makes it the easiest category to differentiate in.
Shop by size: 34-inch ultra-wide monitors · 40-inch monitors · 5K monitors |
FHD and QHD panels with height-adjustable stands, USB-C 65W docking variants, built-in speakers and daisy-chain DisplayPort. Customisable here: ergonomic stand travel, port layout, VESA plate, cable management cover. This is the category most IT distributors rebrand, because the specification is stable and the lead time is predictable.
Shop by type: OEM LCD monitors · 23.8-inch business monitors |
||
 |
 |
 |
||
| Curved monitors, 23.8"–49", 60–280Hz | OLED monitors, 27"–32" | All-in-One PC, 21.5"–27" | ||
|
Sixty-six curved models across 23.8", 27", 31.5", 32", 34", 40" and 49", all on 1500R curvature — VA on the 16:9 sizes and the 34" ultra-wide, IPS on the 40" and 49" panels. Refresh rates run from 60Hz to 280Hz: the 27" FHD reaches 280Hz, and 240Hz is available at 27" QHD, 31.5" QHD and 32" FHD. Most curved projects we quote start from a 27" QHD 240Hz or 32" FHD 240Hz platform.
Shop by size:custom curved monitors · 27-inch curved monitors · 32-inch curved monitors · 24-inch curved monitors |
QD-OLED and WOLED panels at 240Hz with 1,500,000:1 contrast and 0.03ms response. Customisable here: stand, port set, OSD presets, packaging protection grade. This is our smallest and most specialised tier, quoted case by case at 300 PCS — tell us the panel generation you need and we will confirm allocation before you commit.
Shop by type: OLED monitors |
Integrated mainboard, RAM and storage options, touch and non-touch panels, VESA-mount and stand versions. Customisable here: CPU and memory configuration, storage size, camera and microphone module, chassis colour. Delivered as a complete unit, so brand identity covers the chassis, the boot sequence and the pre-installed system image.
Shop by type: all-in-one PC monitors |
A logo-level order typically runs 3 weeks from artwork approval to shipment. A new housing adds 2 weeks for tooling plus 7 days for sample approval. We quote a delivery window rather than a single date, because inspection scheduling and vessel space both move.
Every unit is colour-calibrated on a Konica Minolta CA-410 and ESD-tested at 22KV before packing, which supports a ≥98% first-pass yield and a ≤0.6% annual repair rate across three million units of annual output. We publish all three numbers together because a certificate without test equipment is a document, and test equipment without yield data is a claim.
Certification we hold
| Scope | Standard |
| Factory system | ISO 9001,ISO 14001,BSCI social compliance audit |
| Product safety and EMC | CE, FCC, CB, RoHS, KC / KCC |
| Energy | Energy Star |
| Company qualification | China National High-Tech Enterprise (2024), Guangdong Specialised and Sophisticated SME (2023) |
Test equipment in our own lab
- Konica Minolta CA-410 colour analyser — colour accuracy and gamut calibration, run on every unit rather than on a sample
- 22KV ESD generator — electrostatic immunity testing to IEC 61000-4-2 contact discharge
- Temperature and humidity chamber, vibration table, drop tester — transport and environmental testing, including a carton drop sequence that matches the shipping mode
- Key-press life tester — OSD button endurance to 100,000 cycles
Quality data we publish
- First-pass yield: ≥98% on finished units
- Annual repair rate: ≤0.6% across all categories, ≤0.3% on office models
- Output: 3 million units per year across 15,000 m² of manufacturing space
15,000 m² of manufacturing space, 320+ staff and three million units of annual capacity, operating since 1999 as the former Universal Computer & Electronics Factory, the team behind the VIEWG brand. We design, tool, assemble and test in one location in Shunde, Foshan — so a change agreed on the line does not have to travel through a trading company first.
Verify us before you order
Building 4, Zone 4, Wanyang Sci-Tech Park, No. 1 Huangyong Industrial Avenue, Huanglong Village, Beijiao Town, Shunde District, Foshan, Guangdong, China. Factory audits and unannounced third-party inspections are welcome. If travel is not practical, we arrange a live video walkthrough of the line and the lab at a time that suits your working hours.
Who we work with
| Brand owners. | IT distributors. | System integrators. | Enterprise and tender buyers. | |||
| You are building a monitor line from zero and need a manufacturer who will still be shipping the same platform in three years. You start at 300 PCS on an existing platform with no mould cost, and move to a private housing only once the volume supports it. | You have channel reach but no own-brand model, and you need margin and a delivery date you can commit to. Standard models rebranded at 300 PCS, with regional power cord, language pack and packaging adapted for your market. | Your projects specify unusual port combinations, non-standard sizes or a fixed bracket, and an off-the-shelf model will not pass the customer's acceptance test. Board-level and port-layout customisation on an existing panel, quoted against your project specification. | You buy in batches, and the tender document asks for certificates and a repair-rate figure before it asks for a price. CE, FCC, CB, KC and RoHS on file, third-party pre-shipment inspection, and annual repair-rate data you can attach to the bid. |
| Q1: What is the minimum order quantity for an OEM monitor? | Q2: Can I start with an existing model and just add my brand? | |||
| A: 300 PCS for logo, packaging, accessory and market-specific changes, because those four categories run on existing tooling. Product configuration changes also start at 300 PCS as long as the panel and board already exist in our range. A new housing or private mould starts at 300 PCS plus a one-off tooling cost, which we quote separately and can amortise across the first orders. | A: 300 PCS for logo, packaging, accessory and market-specific changes, because those four categories run on existing tooling. Product configuration changes also start at 300 PCS as long as the panel and board already exist in our range. A new housing or private mould starts at 300 PCS plus a one-off tooling cost, which we quote separately and can amortise across the first orders. | |||
| Q: Can you print our logo and design the retail packaging? | Q4: Which logo files should I send? | |||
| A: We print the front bezel logo, the rear logo and the boot logo, and localise the OSD menu language. Packaging covers the colour box, rating plate, serial label, barcode, manual and warranty card. Logo and packaging both start at 300 PCS; a colour box needs a one-off die-cut, which is quoted with the sample. | A: An AI, PDF or SVG master with fonts outlined, plus a monochrome version. Vector files keep the logo sharp at any print size and any bezel width. If you want a custom boot logo, also send a high-resolution PNG or BMP at the panel's native resolution. If you only have a JPG, send it — we will tell you whether it can be redrawn cleanly. | |||
| Q5: Is a colour box always necessary? | Q6: How do I choose the correct power cord? | |||
| A: No. Distribution and tender orders often ship in plain corrugated cartons, which cuts packaging cost and shortens lead time. A printed colour box makes sense for retail, where the box carries part of the purchase decision. Both options are available on the same 300 PCS order, and you can mix them within one shipment. | A: Confirm four items, not one: the plug standard for the destination country, the cable gauge, the adapter output and the DC polarity. A plug that physically fits is not the same as a supply approved for that market, and reversed polarity damages the board on first power-up. We lock all four on the proforma invoice before production starts. | |||
| Q7: Do you provide CE, FCC and CB certificates for our market? | Q8: What is your annual repair rate and first-pass yield? | |||
| A: We hold CE, FCC, CB, RoHS and KC/KCC for the products, plus ISO 9001 and BSCI for the factory, and the full certificate package is sent with the quotation. For markets where we do not hold certification — UKCA / PSE / EAC / NOM — we arrange testing through a third-party lab and quote the cost and lead time before you commit to volume. | A: First-pass yield on finished units is ≥98%, and the annual repair rate is ≤0.6% across all categories, ≤0.3% on office models. Both figures come from three million units of annual output and are supported by in-line colour calibration on a Konica Minolta CA-410 and 22KV ESD testing before packing. |
Building 4, Zone 4, Wanyang Science and Technology Park, No. 1, Huangyong Industrial Avenue, Huanglong Village, Beijiao Town, Shunde District, Foshan City, China
020-39969989
Email: allen.wang@gdseaview.com
IPv6 network supported
